About meHello everyone.
I am very easy to use.
You only need turn on your drone and I will record RAW data of GNSS signal.
You just need to make settings for me one time. Recommended settings for GNSS are:
GPS + GLONASS + GALILEO | 5 or 10 Hz
If you need 20 Hz RAW data recording, please set it to:
GPS + GLONASS | 20 Hz
GPS + GALILEO | 20 Hz About my working indication: Extra LED:
Yellow blinking - good work, but there are no satellites
Green blinking - good work with satellites
Red blinking - failure :((( Please contact to Lidaru by TelegramSound:
Beep Beep Beep when you power on a drone - I am initializing
Short music - I am ready to record RAW data - Extra LED starts blink GREEN
More info: http://Teokit.com
New firmwares are here: https://t.me/Teodrone
Our telegram chat: https://t.me/TeokitEN
PM of tech specialist: https://t.me/Lidaru
Teodrone, Teokit, AGNSS, AShot are trademarks of Vanavara Digital Company, Russia